Chamaeleon Eco

Up to 93% energy savings

A value offering for low occupancy spaces

Overview

The Chamaeleon Eco, designed by enLighten Australia, it complements the Chamaeleon range to offer a complete back of house lighting solution for residential strata common areas, commercial and industrial applications.

It is an excellent choice for fire stairs, car parks and corridors, with both emergency and non emergency options available. Easy to install using a screw less gear tray with pre-drilled holes and a large terminal block.


Product Features

Highlights

Key Features

WHAT'S NEW? 

  • Over 100 lumens per watt luminaire efficacy - an 18% improvement
  • Improved D50 emergency classification (up from D40) supports compliance with AS 2293.3

REGULAR FEATURES

  • Integrated microwave motion sensor triggers automatic switching between full and standby light output in standard and emergency models
  • High performance LUMILEDS LEDs
  • Generous heat sink to optimise LED performance
  • Indoor or outdoor use supported by water and dust proof rating of IP65

Applications

Awards

  • Awarded 2015 | Best enviro Light
  • Awarded 2016 | Best enviro Light
  • Awarded 2017 | Best enviro Light
Technical Info

TECHNICAL INFORMATION

  OPTICAL  
  Light source   Lumileds LED
  Lumen output     2500 lumen
  CRI   Ra>80
  CCT   4000K






  ELECTRICAL  
  Power consumption   22W full light output (standard), 25W (emergency)
  Operating frequency   50/60 Hz
  Operating voltage range   100 -240 V AC
  Power factor   >0.9 240 V AC at full load






  EMERGENCY LIGHT  
  Battery type    7.2V NiMH 1800mAh
  Discharge time   90 minutes
  Emergency classification   D50





  ENVIRONMENTALLY     
  IP rating    IP65
  Impact rating   IK10
  Weight   2.5kg standard, 3kg emergency





  Controls                              Microwave motion sensor & PE   
  daylight sensor standard.
  Optional IR remote control
Installation

MICROWAVE SENSOR SETTINGS

A commissioning tool is available for purchase from enLighten Australia.
To apply a setting point the remote at the fitting and press the button with
the desired setting. The fitting will beep if the setting is received successfully.



REMOTE COMMISSIONING TOOL

A commissioning tool is available for purchase from enLighten Australia.
To apply a setting to the fitting, point the remote at the fitting and
press the button with the desired setting. The fitting will beep if the setting
is received successfully.