Vico LED Linear Batten - IN STOCK NOW!

Improved efficacy, Eco Dim switch & LiFeP04 battery


enLighten's Vico weatherproof IP65 LED batten offers a simple T8 or T5 fluorescent batten replacement.  Vico is an intelligent LED lighting solution for long lit low occupancy spaces, the Vico is available in 600mm (16W), 1200mm (30W) & 1500mm (42w) models.

The next generation of  the Vico batten has been released...with  improved efficacy of up to 142 Lm/W, a NEW Eco Dim switch to half power mode and an LiFeP04 battery. 

The Vico is available in emergency and standard, it is ideal for corridors, fire stairs, store rooms, plant rooms and undercover car parks.

The Vico batten can be fitted with a DALI-2 compliant driver that easily connects to an existing lighting control system. DALI is not available in emergency models.

 Download how to make your car park entrance compliant to AS1680

Product Features


Key Features

  • Option of microwave motion sensor with standby light operating at 20% brightness for both standard & emergency versions
  • High colour rendering index (CRI) of over 80
  • Microwave motion sensor range up to 8m
  • Flexibility to set motion sensor timer for full light output to either 10, 30 or 90 seconds or 3 minutes.
  • Environmentally friendly & stable LiFePO4 battery
  • High performance Samsung LEDs
  • Screwless gear tray fixing & rotating tabs that lock in to gear tray support easy installation
  • Water & dust proof, supported by IP65 rating
  • IPART, VEET & REES approved for rebates in NSW, VIC & SA.
  • Compelling project paybacks of under 2 years for lighting retrofits
  • Luminaire efficacy of up to 142 lumens per watt
  • Suited for both indoor & outdoor use


Technical Info


BL06   600mm standard
BL06S    600mm with MW sensor
  600mm emergency
BL06ES   600mm emergency with MW sensor 
  1200mm standard
BL12S    1200mm with MW sensor 
BL12E     1200mm emergency
  1200mm with MW sensor 
BL15    1500mm standard 
  1500mm with MW sensor 
BL15E    1500mm emergency
BL15ES    1500mm emergency with MW sensor 

Light source   Samsung LED
Lumen output    2215 - 5710 lumen
CRI   Ra>80
CCT   5000K standard, 4000K and 5700K available on request

Power consumption   16W-42W full light output
Operating frequency   50/60 Hz
Operating voltage range   220 -240 V AC

Battery type  6.4V 3000 mAh LiFePO4
Discharge time 90 minutes

IP rating    IP65
Impact rating    IK10
  Weight   600mm - 1.8kg, 1200mm - 2.9kg, 1500mm - 3.4kg 
Ambient temperature range     -25°C to +40°C(standard models)
  0°C to +40°C(emergency models)

Microwave sensor range    360 deg; max 8m - adjustable
Microwave sensor operating interval
  5 sec to 3 min
  (default setting 30 sec)



1. Remove diffuser cover
2. Turn knobs to release and remove the gear tray
3. Feed mains cable into fitting and mount luminaire base to ceiling
4. Hang gear tray onto luminaire base using the bungy cord
5. Connect mains wiring to terminal block
6. Emergency models only: Plug green indicator cable into driver. Ensure correct polarity is maintained by keeping the raised imprint & ink mark away from driver
7. Emergency models only: connect plug from battery cable to driver & record date of commissioning on battery
8. Adjust microwave sensor settings as required - see Microwave Sensor settings section
9. Secure the gear tray and diffuse onto the base.