Chamaeleon Deco2

with Selectable brightness and colour temperature

Overview

The Chamaeleon Deco 2 is an elegant, slim and versatile decorative light, that is easy to customise, with adjustable brightness and dual colour temperature switch.

It has an integrated smart daylight sensor, your lights only turn on only when needed. The Chamaeleon Deco 2 is a smart light that goes into standby mode at dusk and reaches full light when motion is detected. At dawn the luminaire switches off automatically to save energy.

This versatile bulkhead comes with a dual colour switch,  making it easy for you to achieve the colour temperature you need, choose from 3000K warm white or 4000K natural white. Having completely separate light circuits ensures colour consistency over the age of the fitting.

Product Features

5 year warranty Daylight Sensor Emergency Microwave Sensor Safety Compliance IK10 Rating IP44 Rating Duel Colour Tempreture Selectable brightness
Highlights

Key Features

  • Emergency and non-emergency options available
  • Adjustable brightness - 1500/1000/700 lumens options within same fitting
  • Dual colour switch - with the flick of a switch choose either 3000K warm white or 4000K natural white colour tone
  • 2 & 3 Step sensor dimming - offers full, standby & off modes
  • Smart daylight sensor - your lights only turn on when needed
  • Flicker free

Applications

Corridors Fire stairs Foyers Lobbies Toilets
Technical Info
 PRODUCT RANGE  
D2-CHAMChamaeleon Deco 2 Standard with in-built microwave and daylight sensors
D2-CHAM-EChamaeleon Deco 2 Emergency with in-built microwave and daylight sensors
  OPTICAL 
Light source                   Samsung LEDs
Lumen output 1500 (max), 1000, 700 lumen
CRI Ra>80
CCT 3000K or 4000K (selectable colour)
  ELECTRICAL 
Power consumption 16W Standard, 17W Emergency
Standby light level 25%, 10% & Off
Standby power  0.5W-5.5W
Operating frequency 50/60Hz
Operating voltage range  220 -240 V AC
  EMERGENCY LIGHT  
Battery type LiFePO4 (2 year warranty)
Discharge time90 minutes
Emergency classification D40
  ENVIRONMENTALLY 
IP rating IP44
Impact rating IK10
Weight1.3kg standard, 1.5kg emergency
Temperature range (standard) -10°C to +40°C
Temperature range (emergency) 0°C to +40°C
Material Composition (body)Polycarbonate (UV stabilised)
Material Composition (diffuser) Polycarbonate (UV stabilised)
Expected LED Lifespan> 60,000 hours @ L70
  CONTROLS 
Selectable brightness
Allows for adjustable brightness, select 1500lm, 1000lm or 700lm
Selectable colour temperature
3000K or 4000K
Smart daylight sensorStandby at dusk, full light when motion is detected and switches off automatically with morning light
Smart daylight sensorStandby at dusk, full light when motion is detected and switches off automatically with morning light
Integrated motion sensor2 & 3-step dimming to standby level or off
Installation

MOUNTING


Remove the diffuser by twisting off.







Feed cables through the base and mount to the ceiling. Alternatively use the conduit entries on the side. If there is an earth wire, it should be terminated.



Connect wires into push terminals. Place the neutral wire into the terminal marked with 'N', active wire into terminal marked with '1'. Do not connect active wire into terminal '2'.



Ensure cables do not cover the LEDs.





Adjustments:
(1) Microwave sensor settings
(2) Power settings
(3) Colour temperature (refer below)


Twist the diffuser onto the base

ADJUSTING THE COLOUR TEMPERATURE



The colour temperature of this fitting can be to 3000K (warm white) or 4000K (neutral white). The default setting is 4000K. To change the colour temperature, set the desired setting. This should only be done with power to the fitting switched off.


ADJUSTING THE FULL LIGHT OUTPUT


The full light output of the fitting can be changed from 100% to 70% or 50%. The default setting is 100%. To change the setting, adjust the dipswitches as shown above. This should only be done with the power to the fitting switched off.